Home | 繁體版 | 簡體版   Non-shrink grout YL600 is a non-metallic shrinkage-free grout. Together with water, sand, cement mortar or concrete, the grouting provide stable, high strength, and non-staining qualities that is able to handle situations requiring high load transfers and positive expansion. This is applicable in construction that requires anchoring of structural steel, pre-cast concrete members, under pinning and filling of voids, holes, cracks, installation, jointing and grouting of concrete units and concrete repairs. The contents contain no chlorides or other substances, which could aggravate corrosion of reinforcing steel or pre stressed steel cables in buildings and structures.     Non-metallic powdered shrinkage-free Grouting material. Appear like cement, with no additives that causes staining. Apply to achieve positive expansion and compensate for shrinkage. High flowability with self-leveling qualities. Strong bond eliminates shrinking. Blocking of capillarity, meet the stress transfer.       Machine base   Inverse quadratic fittings   Bridge bearing pads   Expansion joint   Cellular repair   Column baseplates   Anchor bolts   Bridge-bearing seats         (Click to enlarge)       Application ratio(kg/m3)   Water Cement Sand (dried) YL600 324 900 900 54   Technical Information － YL 600   Test Items Unit Testing Results Testing Methodology Expansion % +0.25 ASTMC827 Flow rate %(mm) 145(245) ASTMC109 Bleeding rate % 0.0 ASTMC940 Compression Strength 7 days kgf/cm2 480 ASTMC109 28 days kgf/cm2 650 ASTMC109